BeagleY-AI Pinout

Legend

Orientate your BeagleY-AI with the GPIO on the right and the HDMI port(s) on the left.

(*) Denotes pins that differ in functionality on BeagleY-AI as compared to Raspberry Pi 4/5

SPI - Serial Peripheral Interface


Known as the four-wire serial bus, SPI lets you attach multiple compatible devices to a single set of pins by assigning them different chip-select pins.

To talk to an SPI device, you assert its corresponding chip-select pin.

By default the BeagleY allows you to use SPI0 with chip select pins on CE0 on GPIO 8 and CE1 on GPIO 7

NOTE - For compatibility reasons, BeagleY-AI uses Software SPI and Symlinks to match the Raspberry Pi. Additional HW SPI resources are available for advanced users.

Details